zonegoat09 posted an update 1 year, 5 months ago
An enhancing molding serves as a any continuous projection utilized to enhance the appearance of a wall. In ancient Greece, these folks were first employed to throw water outside the wall. The contours, measurements, and projections of moldings vary greatly.
One sort of molding – the frieze (or frieze board) – was first utilized on the Parthenon at the Acropolis. The frieze is recognized as a part of the Greek architectural style.
The Parthenon was developed for the goddess Athena. The frieze moldings that have been used were supposed to tell the tale of her triumph over Poseidon in succeeding as the patron from the ancient city which can be now Athens.
The frieze panels can be a compilation of designed pediments which are filled up with the photographs of Athena’s birth and rise to power. Today, a frieze board could be the lcd just under a crown molding or cornice. Often, low relief is used to this panel for added decoration.
Today, frieze moldings are most typical being a area of a decorative molding that follows the neoclassical architecture or decorating style.
You’ll need a pretty high ceiling (at least 9 feet), and it is smart to stain or paint the frieze as well as the crown molding exactly the same color. The frieze is a great way to visually bring the ceiling down to make the area appear cozier.
Crown molding is the most popular kind of cornice molding. Crown molding can be quite a single-piece of decorative molding, installed at the top of a wall, in an angle to the adjoining ceiling. However, I’ve come across crown molding assemblies of 5 or even more pieces in elaborate settings.
Crown molding often carries a profile that projects on the ceiling and around the wall, adding a rich appearance to a room. It’s used on top of cabinets or built-in furniture.
Introducing this type of decorative molding into a relatively simple room offers a historic character that the room may not otherwise have. Crown molding is additionally in combination with other moldings to include details to fireplace mantels and shelves. (For which it’s worth, this might be my personal favorite architectural feature).
Crown molding is often a type of Cornice Molding. The definition of "cornice" describes molding installed down the the surface of a wall or over from the. If this treatment methods are made from multiple components of molding, it is called a "build-up cornice." The other type of cornice molding may be the Cove Molding.
Cove molding is very much like crown molding, with the same application overall performance. The difference between the two is incorporated in the profile. Cove molding features a concave profile (which bows inward) while crown molding features a convex (outward) profile.
While crown is most in your own home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. That you do not normally see multi-piece assemblies of cove moldings. It is possible to occasionally notice "beaded" at upper and lower for a little accent.
Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.
Kitchens along with other more functional areas of the house could be where you will find the more kind of the cove molding. Through the years, coves and crowns have grown to be more compact, but a majority of still bear the shapes and styles from the original Greek and Roman designers.
Chair Rail Molding
A chair rail is a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in areas where damage might occur from people arising from chairs.
For this reason, the harder traditional chair rails will have a nosing within the center, with curved and beveled surfaces that taper back to the wall above and beneath the nosing.
Today, chair rails remain perhaps the most common detail in traditional interiors. They serve the decorating aftereffect of unifying the many architectural information a space, such as door and window trim, and fireplace surrounds.
Chair rail may also be used being a cap for wainscoting or another wood paneling. This decorative molding adds a feeling of detail and charm while achieving continuity in the room by unifying the different decorative elements.
Panel molding, commonly referred to as a picture frame molding, appears like a big empty frame, and it is often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The location on this molding ought to be above the chair rail height leading to Ten to twelve inches down from the ceiling.
The dimensions of this type of decorative molding, measuring 1" to 3" wide, should be proportionate on the ceiling height from the room. Such as the other moldings, panel molding adds a feeling of charm and delicate detail to some room.
Wall framing appears at the Georgian duration of American architecture, when plaster began to replace wood panels around the walls. Panel molding is also a fantastic way to divide walls into large, great looking units, minus the same cost of full wall paneling.
Another application of this versatile molding would be to trim openings produced by wider planks that are assembled as rails and styles. Often, the centers of such frames are still open. Through the use of panel moldings throughout the perimeter in the opening, you develop the appearance of a photo frame.
After this decorative molding is painted from the same color because surrounding walls, you accomplish a sculptural quality with a wall, adding texture and shadows. If moldings are painted in contrasting colors, they are able to build a striking 3d appearance, giving depth and dimension. This kind of treatment is popular for staircases and entries.
Baseboard & Base Molding
Baseboard molding protects the foot of the wall from ware and tear, while hiding openings as well as other irregularities the location where the wall meets the floor. Base moldings provide the floor line an increased profile, and is as elaborate or simple as you want.
Whereas it’s relatively simple to put in chair rail with a level plane, baseboard (like crown) can be tricky should your floors (or ceilings) are not level. Because of this, I recommend getting a professional woodworker for the installing these moldings.
As you remedy to uneven floors, it is possible to install a "shoe molding" over the bottom front edge to obtain the baseboard a finished look. Something else you can do with baseboard (as well as using the toe kick of your respective kitchen cabinets) is incorporate accent lighting.
This is not consistent with the pure traditionalist, however it is quite a nifty approach to have accent lighting across the perimeter of a room. You could not try this until they come up with small LED rope lights of today.
Rope lights can be found in different lengths and colors, and can be easily installed behind baseboard. Only make a notch within the back side of the baseboard, at the top, and run the rope lights in the notch.
This really is often used in commercial spaces, but continues to be included entries and hallways – particularly in contemporary homes.
When you have a curved wall or arch, you’ll be able to sure enough have a good craftsman produce a curved molding approximately 3 x the price of a straight molding. Or, you should buy a flexible molding for around the same price because the straight one.
These let you install moldings onto curved surfaces or arches, minus the delay and cost of getting them to created from wood. The stock profiles (there are hundreds) are similar towards the rigid versions and they are generally compatible in terms of paint finish is involved.
To get more information about
phao chi pu view this popular resource.